It is completely different to use a stand-up lift truck compared to a sit-down unit. The way you transport and pick up loads along with your movements are completely different. If you do not have correct training for utilizing a stand-up unit, you could possibly cause harm to yourself or to co-employees. When using a stand-up unit, you should follow the correct safety rules. There are a few basic operating standards which should be met when utilizing a stand-up unit.
To start on a stand-up unit forklift, it is essential to get a good feel for the steering knob and the controls. Rather than a steering wheel, the steering is handled with the knob steering plate. Take note that this specific knob moves very fast, hence, you should get used to moving it carefully in order to be certain not to over steer. The horn is situated on the control handle, as is the control for the fork movement and for backwards, forwards. The floor pedal enables the machine to move.
When you are ready to start, turn the key to start the forklift. Be sure that your forks are not extended. If you are moving around the floor, the forks must be pointed a little upwards. Never drive with the forks in their extended position. If you are traveling forwards, move the control handle forward and step on the pedal in order to make the lift move forward. If you are backing up, be sure to beep your horn to warn people around you. Look behind you prior to stepping on the pedal in order to make sure the way is clear and safe. Next, pull the control handle towards you while stepping on the pedal. Stay alert and focused and make sure that you are operating in a safe way at all times.
When approaching a corner with the lift truck, turn the steering knob towards the direction you are heading. Make sure to keep your hands on the control handle and keep your foot on the accelerator. When turning right, the steering knob will move in a clockwise direction while moving forward. If you are turning left, your steering knob will go in a counter-clockwise direction.
If you have just used sit down models, the stand-up versions can take some getting used to. If you take some time to figure out the equipment and with some training, you will be able to quickly and efficiently handle loads in little time.